Midlands Detailing Day

[Gaz W]

Hey everyone, i was thinking, its about time we had a midlands mini meet/detailing day. Anyone thinking the same? But, we need to sort out date and venue :o

Cheers, Junior

[perm]

great idea,
This has been tried before, lots of interest but we could not find a suitabe location for the meet.

Hope this time someone can come up with the goods.

Cheers

[MidsDetailing]

I mentioned this to K80 today - would be a good idea, just need an ideal location now!

[aston_87]

Yhe would be interested in this what is ened for location and il see what i can do...?

[k80]

I did offer to use our warehouse some months ago but there was little responce. Its situated 5 minutes from m6 J16 so central to most.

[rorton]

M6 J16 sounds brill (2 mins up the road from me :) :))

Easy access for people too though, just nip of the motor way, and there you are!

[MidsDetailing]

6 juntions, well 7 for me :thumb:

[Chopper]

Count me in too :wave: ( if you would be so kind )

[Peach]

I'd be up for this too, just tell me when and were :)

[k80]

rorton, where are you located?

Lets see what responce we get and then perhaps arrange a day.

[Xorro]

J16 would be an excellent location, what place would it be exactly?

[aston_87]

12 junctions for me, o well!!

[k80]

J16 would be an excellent location, what place would it be exactly?

The same place as the North Staffs FFOC open day took place

http://www.detailingworld.co.uk/showthread.php?t=10603&highlight=north+staffs

[dubbers]

I'm interested in attending :buffer: ..Redditch isn't too far from Caudwell country!;) If you need a donor car, my metallic black Golf has thwarted my deswirl & correction attempts so far.:eek:

[rorton]

k80, im in Sneyd Green mate, just outside Hanley, where abouts are you?

[jonboy]

Depending what date i 'll have a drive over and say hello :wave:
Can bring some Wolfgang and Pinnacle products with me for you to try if you want :thumb:

[matt_mph]

I'd be up for going if someone can taxi me lol, pay petrol money of course

[rorton]

i can bring my Autobrite Foam lance and some super snow foam if you have a Karcher Washer??! :) Be fun for half an hour!

[gazza_zetec]

I wouldn't mind popping along.

Obviously stoke is great for me lol

[rorton]

we should have a stoke mini meet up anyway :) few stokies here i think!

[myxa]

When may this happen ?
What about somewhere Nottingham :rolleyes:

[MidsDetailing]

i think b'ham is more central ;) :rolleyes:

[gazza_zetec]

we should have a stoke mini meet up anyway :) few stokies here i think!

sounds good, as long as it isn't up Festival Park on a sunday night lol

[Adam]

A meet up sounds good to me

Birmingham would be brilliant

Would be great to get some advice if possible for getting my black mini's paint up to
standard

[autobrite-direct]

What about Keele services near Jun 16?

I could be there too!!

[rorton]

keele for which Mark, meet, or detailing day!??!

Keele be hard for a detaling day :( no easy access to power and running water :lol:

[charlievarley]

Count me in as interested too.....

[Gaz W]

So guys, are we gonna go for K80's warehouse?

[k80]

k80, im in Sneyd Green mate, just outside Hanley, where abouts are you?

Rorton im in Kidsgrove, do you have a PC?

I'll have to withdraw my offer of using the warehouse where I work, one or two indivuals have complained and I dont wont to cause any trouble.

[matt_mph]

I would love to come if someone from the nottingham area is willing to give me a lift

[rorton]

K80, no PC mate, but am a hairs wisker away from ordering one, although the weather has changed for the worst for outside detaling :( dont have a garage/carport do you? :)

[f1john]

K80, no PC mate, but am a hairs wisker away from ordering one, although the weather has changed for the worst for outside detaling :( dont have a garage/carport do you? :)

PLEASE PUT AN IGNORAMUS OUT OF HIS MISERY
What is a PC? (Don't laugh, I'm new here, & i think i'm using my PC to access the website).:confused:

[huddo]

:wave: John it stands for Porter Cable, its a dual orbiter :buffer: polishing machine imported from the USA :buffer: . If you do a search for it you'll find loads of usefull info on it. Hi btw.

[autobrite-direct]

I will ask my mate who has a large packaging warehouse in stoke.Its worth a shot! :thumb:

[Gaz W]

I will ask my mate who has a large packaging warehouse in stoke.Its worth a shot! :thumb:

Yeh! Sounds good, water and power? :)

[autobrite-direct]

Yup! :thumb:

[Gaz W]

:D We Need IT! :D

[matt_mph]

so whats the latest people

[detailfinish]

I am up for this, will bring my little motor for 'demonstrations' :wink:

[Mr OCD]

M6 J16 sounds brill (2 mins up the road from me :) :))

Easy access for people too though, just nip of the motor way, and there you are!

Be warned... M6 Junction 16 is a PITA - just been in that today and MAJOR roadworks off it...

[frizz]

i have pc:buffer: /transformer and leads/sonus stuff, only in burton on trent.

[somouk]

I would be up for this, somewhere around birmingham would be the easiest!!

Mart

[dogbonnie]

i would be interested, If you dont mind a "silver detailer" just tellme when, only 4 junctions for me.

[Benji_406coupe]

im up for it!!! hasnt happened yet has it???

better do it soon if it aint whilst we've still got the weather!!

[wilbz11]

im in to:thumb:

[Jace]

Isnt this town classed as being in "The Midlands"

Meguiar's UK Ltd,
3 Lamport Court,
Heartlands,
Daventry,
NN11 8UF

Now that would make a good venue, IMO.

[matt_mph]

Would be a good venue but that means i'd be out for a start and quiet alot of people i know wouldn't. :( i still say brum :) more central

[Xorro]

Daventry sounds good and easy to get to from the M1

[Gaz W]

OK, Autobrite dude may have found a good place in newcastle under lyme, kinda midlandsish, approx an hour from central Bham :D

[Gaz W]

:D We have got the werehouse place that auto brite direct has got us, its free for a sat or sunday! :D

Anyone suggest dates? :) (its in newcastle under lyme)

[gazza_zetec]

Thats pretty handy seeing as i live in Newcastle under Lyme

[blr123]

Just seen this........if it were Newcastle I would gate crash :D ..........if the date was rite (I work shifts) :rolleyes:

Bryan

PS I have a PC, tranny, rotary, etc etc :thumb:

[Custom Detailers]

Just seen this........if it were Newcastle I would gate crash :D ..........if the date was rite (I work shifts) :rolleyes:

Bryan

PS I have a tranny
:doublesho

[rorton]

yipeee :) 2 mins up the road from me! Sat sounds cool

[blr123]

:doublesho

Pick you up on tnhe way past graham :thumb:

Bryan

[Gaz W]

This saturday may not be gd for me :(

And for some people its a bit short notice

I think we should delay it a bit to sort of mid november :)

Say Sat 18th Nov? or Sun 19th would be better actually

[blr123]

I'd be OK for the 18th or 19th at the mo :thumb:

Bryan

[Gaz W]

I'd be OK for the 18th or 19th at the mo :thumb:

Bryan

This is the MIDLANDS meet bryan :p

Under 50's only aswell :lol:

[jonboy]

Love to do this but can't make the 19th sorry

[blr123]

This is the MIDLANDS meet bryan :p

Under 50's only aswell :lol:

1. you should know by now that distance is not barrier to me
2. under 50's only.........in that case I still qualify :lol:

Bryan............em jist a young thing ye ken (you probably WILL be able to read that cause the spelling is sooooooo bad :lol: )

[Gaz W]

:lol:

[cupra-matt]

Might be able to pop along if my car can be a guinea pig.

Never seen a pc, she would love a bit of correction.

keep me posted.

[somouk]

Theres a rollin groad day im going to on the 18th but might be able to make both. Could someone confirma llt he details though maybe in a new thread?

Mart

[Rinko]

Did this day ever happen - I assume not from the way the thread has fallen a bit flat.

Are people still up for it - I'd certainly be interested, especially if it was S-O-T or Newcastle based :p

[Richj]

anywhere near Leicester would be good

[ChuckH]

I to am very interested THANKS

[autobrite-direct]

Ok guys!


We have now space for about 40 cars!! Let get this organized! See 13yearoldetailer!

[mba]

When and where my good friend?

[rorton]

yipee :) indoors or outside??!! May be a little bitter outside at this time of year!!?!?!?!

[Gaz W]

yipee :) indoors or outside??!! May be a little bitter outside at this time of year!!?!?!?!

We will have limited indoors space! But enough for us to shelter in and still chat with maybe a few cars in with demo's if the weather is bad! :)

Gaz

[vtec160bhp]

wats going on with this meet dude i am up for it just give me a time and date and place and i will be there