Detailing World Forum banner

2011 Detailers Gathering at Osren, Malaysia.

13K views 11 replies 11 participants last post by  CliveP 
#1 ·
Hi there! We had a gathering recently and I thought I'd share some photos with you guys.

























A member was also kind enough to share with us his new surbuf and Meguiar's microfiber pads.





M105 and Surbuf managed to remove 1200 grit sanding marks! Although it left a slightly hazy finish which has to be followed up with a finer combo.

















Mid-way, we even had a mini torch gathering!









They are talking about the size of abrasives/water beading, in case anyone had other ideas.





Japanese Polish, American Pad, German Machine.



The new Flex rotary is so light, you only need your fingertips to guide it!



Then it was time for some supernatural action.





















Water sheeting video of Bilt Hamber Finis-Wax.




Osren P40 and Velvet Pad

Before:


After:


Where the Velvet pad does not reach, hand sanding and wool ball.





Caution is advised.



The two photos below show the strength of water repellency in a wax/sealant.



In the photo above, notice that as soon as the water hits the paint, some of it is flat on the paint. Compare that to the photo below, water repels and bounces back immediately, indicating stronger water repellency.







Thanks for looking :)
 
See less See more
1 50
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top