PDA

View Full Version : GYEON Q2 Trim vs Fiesta Zetec-S


SystemClenz
08-05-2013, 03:02 PM
Review: GYEON Q2M Trim

First impressions are;
- Good quality glass bottle with a robust tincture.
- Cotents are a clear liquid
- It has a very faint alcohol smell
- Manufactured by GYEON
- Made in Korea

Plastic trim was cleaned as per pre detail clean using apc and car shampoo.


The product,
http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130507_120828_zpsf489a881.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130507_120828_zpsf489a881.jpg.html)

50/50
http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130507_121140_zpsdfe0f698.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130507_121140_zpsdfe0f698.jpg.html)
http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130507_121135_zpsf611442c.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130507_121135_zpsf611442c.jpg.html)

Waited 30 minutes and then buffed with clean microfibre cloth (as per instructions)

Left to cure for a few hours then tested its waterproofness,
http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130508_142648_zps62a371fe.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130508_142648_zps62a371fe.jpg.html)

It gives a really nice, new look to the trim, its not greasy like some dressings, nor did it leave it all patchy, it went on really easy too :thumb:

Thanks for looking.

Gyeon Jeremy
09-05-2013, 10:59 AM
:thumb:Look's really good. You'll see in a couple months, that the protected trim isn't fading at all. For older cars, where there are a lot of unpainted trim elements, it's a really important thing. :thumb:

SystemClenz
09-05-2013, 11:08 AM
Thanks, and looked amazing, the customer was very impressed and ill be reporting back on its durability :thumb:

Gyeon Robert
09-05-2013, 11:10 AM
I think not couple of months, more like couple of years :) The longest period we have 50/50 panel in test(also not with very newest version...), daily driver is since 02.2012! The panel has still great, deep colour, totally different than non-coated. I think we have to post a pic soon. The other thing is the beading which will last many months but after some time will diminish, but coating will still work, which will be really visible :thumb:

SystemClenz
03-07-2013, 12:22 PM
2 months on and I've just seen this car, it has only been washed once since I used this product and now I've just washed it, the plastics still look and bead fantastically, no signs of fading and the beading is phenomenal.

:thumb:

sprocketser
03-07-2013, 12:24 PM
Impressive !

SystemClenz
20-08-2013, 11:27 AM
3 and a half months on and still the trim on this fiesta looks good and beading well, Unfortunately the bottles just aren't allowing the product to last.

The pipette has gone solid and has resulted in solid bits of ceramic falling into the glass part a d again it was very difficult to prise the 2 bits apart, perhaps just a lid with a dropper would be better?

http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130820_111924_zps8d1e797b.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130820_111924_zps8d1e797b.jpg.html)

http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130820_111959_zps09588d06.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130820_111959_zps09588d06.jpg.html)

http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130820_112033_zpsa864e7e3.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130820_112033_zpsa864e7e3.jpg.html)

Gyeon Robert
20-08-2013, 04:24 PM
You will enjou beading for many months and darkening effect for 2 years at least!

Regarding the pipette, the same for MOHS and all our glass coatings - we strongly recommend to use it, but close the bottle with attached cap when you put it back on shelve. This way the fluid wont become a solid glass during the time you dont use it. You can use pipette, wash it with water and use it next time! :thumb:

tommyzooom
20-08-2013, 10:36 PM
A good tip re the bottles. I assume all the applicators/buffing cloths will have to be disposed of too?

Gyeon Robert
21-08-2013, 08:41 AM
A good tip re the bottles. I assume all the applicators/buffing cloths will have to be disposed of too?

No! You can wash them with your microfibers... And they will be perfect again :thumb:

SystemClenz
27-08-2013, 02:22 PM
Could just be me here but after I had to break the seal to use it the other day, today I looked at the bottle and its starting to go solid! (See pic)

I put the lid back on as tight as I could and still this happened.

Not sure pipettes are the best thing with these products, so anyone looking to buy this product be aware of this.

http://i1090.photobucket.com/albums/i362/Matthew_Dolling/20130827_084711_zps98688760.jpg (http://s1090.photobucket.com/user/Matthew_Dolling/media/20130827_084711_zps98688760.jpg.html)

Gyeon Robert
28-08-2013, 01:02 PM
Sure, this is what is going to happen. We decided to use pipettes as they are very practical and help to use precise amount of product on each application. Many people love it, but of course some will prefere droppers... The only thing you need to do is wash and dry the pipette after using, and closing the bottle with attached cap. This way it will stay fresh and not become solid for a long time.

samEreid
15-11-2014, 09:51 PM
Hi I was wondering if you could use this on a vinyl window on a convertible, someone has recommended this would be perfect but im not so sure as I figured it would peel off when the window is folded up? Cheers

Gyeon Jeremy
16-11-2014, 12:32 PM
You'll find the reply in the other thread you asked about it :)