PDA

View Full Version : Layering Booster and Prime


LuckyStrike
07-02-2016, 11:49 AM
Hi, Jeremy

It`s clear to me that Mohs can be layered (3 layers), but can`t find any information about layering Booster or Prime?

Can i do this and what`s more important, do i benefit anything for doing it?

Gyeon Jeremy
08-02-2016, 10:11 AM
Hi!

Prime was degisned to give full protection and thickness in just one layer, but if you wish, you might layer it for extra durability! I've tested it multiple times and works brilliant.

Booster - layering makes no sense. As it's not a stand-alone coating, it reacts with the base coat - Prime, Mohs or anything else you might want to apply and changes it's surface tension.

LuckyStrike
08-02-2016, 02:28 PM
Thank you, Jeremy.

But, i still have one question about Prime.
How long i have to wait before applying second layer? At least one hour?

Gyeon Jeremy
09-02-2016, 02:24 PM
At least one hour, out of my experience, 3-4 are recommended.

HD Solution
22-12-2016, 04:57 PM
Hi, Jeremy

can you please explain, what is the best time for Q2 Cure After Q2 Prime Application.
or can we use cure in wipe off process in prime

Berylburton
22-12-2016, 06:39 PM
The instructions http://gyeonquartz.com/wp-content/uploads/2016/10/prime_instr.pdf

HD Solution
23-12-2016, 04:56 AM
The instructions http://gyeonquartz.com/wp-content/uploads/2016/10/prime_instr.pdf

Thanks! Berylburton