View Single Post
Old 23-03-2017, 08:42 PM   #19
shine247
OCD Sufferer (Obsessive Car Detailer)
 
shine247's Avatar
 
Join Date: Mar 2010
Location: 702 on and off
Posts: 2,250
Thanks: 1,620
Thanked 1,324 Times in 947 Posts
Experimented with SRP several months back on an old car. I used a DA and cutting pad, just applied some pressure as Alan mentioned in his original post and this was the initial result after one hit.
There were some very deep scratches on this car which were reduced just in line with what Alan had tried to explain. They must have been reduced in depth otherwise SRP leaves all other glaze type products in the shade because this car had never seen any polishing since new in 2000. I know the gentleman at Forensic Detailing suggests it is mineral oil that may cut somewhat but I believe the pad has an effect and with a rotary it gets better. Anyway, that is my experience and this is what I would have put in the original thread. SRP is a top product.

shine247 is offline   Reply With Quote
The Following 5 Users Say Thank You to shine247 For This Useful Post:
Alan W (24-03-2017), neilmcl (23-03-2017), onks (14-03-2018), Radish293 (23-03-2017), trv8 (24-03-2017)