Detailing World  

Go Back   Detailing World > Detailing Products > Polish/Cleaners/Compounds/Glaze
DW Home Forum Home Merchandise Store Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Polish/Cleaners/Compounds/Glaze Discuss Polish/Cleaners/Compounds and Glaze here - Sponsored By g3pro

Reply
 
Thread Tools Display Modes
Old 26-05-2018, 09:06 PM   #1
toptinker
Sponge Jockey
 
toptinker's Avatar
 
Join Date: Jul 2012
Posts: 34
Thanks: 3
Thanked 0 Times in 0 Posts
car pro

hi all. just need a few tips etc.
done the full decon etc. clay bar etc.
2 passes using lime prime.
then I have tried this car pro essence. I do like this. whats your opinion on it ?
think I am ready for applying the gtechniq exo v 3 sealant. my worry is it will be outside over night. will this be ok and any tips on application etc ? thanks
toptinker is offline   Reply With Quote
Old 26-05-2018, 09:38 PM   #2
fatdazza
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Dec 2010
Location: Cambridge
Posts: 3,545
Thanks: 474
Thanked 1,735 Times in 1,241 Posts
Lime prime is an oily polish / glaze.

Not sure that is the best base to then put essence over.
fatdazza is online now   Reply With Quote
Old 26-05-2018, 10:38 PM   #3
PHB1969
Sponge Jockey
 
Join Date: Jul 2017
Posts: 81
Thanks: 20
Thanked 24 Times in 22 Posts
Quote:
Originally Posted by fatdazza View Post
Lime prime is an oily polish / glaze.

Not sure that is the best base to then put essence over.
Agree with that, ideally you want to be back to the paint with nothing on top. Something like IPA or Eraser to remove it.....
PHB1969 is offline   Reply With Quote
Old 26-05-2018, 10:40 PM   #4
Fairtony
PC Perfectionist
 
Join Date: Mar 2018
Posts: 365
Thanks: 115
Thanked 87 Times in 73 Posts
Isn’t essence a souped up cleanser/filler? Id’ve thought it would have been fine.


Sent from my iPhone using Tapatalk
Fairtony is offline   Reply With Quote
Old 26-05-2018, 10:48 PM   #5
Blackroc
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Dec 2012
Location: Lancashire
Posts: 964
Thanks: 154
Thanked 661 Times in 367 Posts
car pro

Exov3 needs to be applied to bare paint too, no polishes or glazes (certainly not Lime Prime) underneath. Pretty sure it’s not a fan of Essence either, most of GTechnics coatings wont sit on on top very happily


Sent from my iPhone using Tapatalk
Blackroc is offline   Reply With Quote
Old 26-05-2018, 11:29 PM   #6
toptinker
Sponge Jockey
 
toptinker's Avatar
 
Join Date: Jul 2012
Posts: 34
Thanks: 3
Thanked 0 Times in 0 Posts
thanks chaps. so what should I do now. should I use a panel wipe to clean all off and start from scratch with the car pro essence ? so lets say I use a panel wipe then just use the essence then panel wipe then exo or poss a wax ?
toptinker is offline   Reply With Quote
Old 27-05-2018, 01:56 AM   #7
waqasr
OCD Sufferer (Obsessive Car Detailer)
 
waqasr's Avatar
 
Join Date: Oct 2011
Location: East London
Posts: 891
Thanks: 453
Thanked 390 Times in 219 Posts
Quote:
Originally Posted by Blackroc View Post
Exov3 needs to be applied to bare paint too, no polishes or glazes (certainly not Lime Prime) underneath. Pretty sure it’s not a fan of Essence either, most of GTechnics coatings wont sit on on top very happily


Sent from my iPhone using Tapatalk
I have used Exo v3 over essence and it works fine. Just make sure you let the essence cure for the required time.

To op, leave out the lime prime, just go essence and then top with exo, or a finishing polish, panel wipe and then exo.
waqasr is offline   Reply With Quote
Old 04-06-2018, 01:18 PM   #8
toptinker
Sponge Jockey
 
toptinker's Avatar
 
Join Date: Jul 2012
Posts: 34
Thanks: 3
Thanked 0 Times in 0 Posts
there looks like some diff opinions on after putting essence on using exo v3 ? some say use panel wipe others saying no need ? would it be safer just to use panel wipe ? if so do you lose some of that shine/gloss etc ?
toptinker is offline   Reply With Quote
Old 04-06-2018, 09:24 PM   #9
-Kev-
Moderator
 
-Kev-'s Avatar
 
Join Date: Oct 2007
Location: ashford, kent
Posts: 35,925
Thanks: 13,280
Thanked 8,739 Times in 6,944 Posts
Garage
Id be using a panel wipe or similar (envy car care filler killer for example) before using any coating - have you used a good light source to check the paint condition? This is imperative before coating after using panel wipe and also to check you haven't missed any coating when removing residue. Leaving the car outside is different if you can get a sacrafical product on like gtechniq c2 over the coating so it can fully cure - i drove my car home after it got coated in siramik with a sacrafical layer of siramik mist on top no problem as long as it doesn't rain. The issue is using coatings outside, assuming you are. Personally i wouldn't. Mine was done indoors
-Kev- is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:10 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors