Detailing World Forum banner

The budget Force Drive polishers

4K views 7 replies 6 participants last post by  Sam6er 
#1 ·
The two I've found that are sub £200 are:

The in2detailing own brand force drive polisher (might be another make and rebranded for in2?) found here http://www.in2detailing.co.uk/produ...ced-rotation-dual-acton-machine-polisher.html at £160.

The vertool force drive polisher found on various sites for £190.

I've had a look at the specs and the only difference between the two seem to be the power of the motor. The vertool has a 1200W motor and the in2 one has a 900W motor.

Can anyone shed some light on either of these? There are a few posts on the vertool machine. But I cant seem to find any reviews on the in2detailing machine.

Or are there any other forcedrive machines un the £200 mark?
 
#3 ·
I currently use the Vertool and it is an absolute pleasure to use.

I've found cutting a delight and even hard German paint has given me no hassle.
Refines down and fishes well too.

It only takes 5 and 6 inch plates so that is an issue if it's your only machine but I laos have the dodo DA so use 3 inch pads on that.

All in all I can highly recommend the Vertool
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top