Detailing World  

Go Back   Detailing World > Gallery > The Showroom > Projects and Restorations
DW Home Forum Home Merchandise Store Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Projects and Restorations Building a car from scratch, restoring your pride and joy, building a track car, or starting a long term project? This is your place to document it.

Reply
 
Thread Tools Display Modes
Old 05-11-2009, 10:27 AM   #1
williamsclio1
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Oct 2009
Posts: 850
Thanks: 663
Thanked 343 Times in 225 Posts
Garage
Ford Racing Puma - Underbody Restoration

Ok all the time has started to protect the underside of the car. I hope my updates help others also looking to protect there car for years to come. Open to ideas and suggestions along the way as this is the first time I have attempted a task to this scale.

At lunch time today I had an hour to burn so decided to make a start on the back box, even tho in the next few days I will be removing it fully to seriously tweak.







After coming across the forum peojectpuma I saw Jacko had started selling short stainless steel bars that fit in the Miltec exhaust to make them look similar to the standard exhaust tip so as that arrived first thing this morning I found 5 mins to fit it, took a little tweaking of the bar but with a gentle tap tap with the hammer all is well,



Personal I think it looks fantastic such a little modification but gives it that standard look. He’s currently selling it on ebay if anyone else is interested.

http://cgi.ebay.co.uk/ford-racing-pu...item2557129f37

I’m fortunate enough to have a garage but its not much wider and longer than the car so its very tight for moving however once under the car space is not an issue its just getting under the car that’s the problem.




Ok started by jacking up the car and putting under axle stands



Photos of the rear carriage of the car, the majority of rust is surface however there are areas were its getting worse.




Removed heat shield





Will be replacing as its cracked in the middle and has seen better days.

Photo of the corrosion under the back box heat shield



Photo of the two bolts holding the heat shield in place.



Quick tidy up with a wire brush



Cleaned the bolts up and sprayed in satin black.



More to come tomorrow.

Not to sure on what product to use, but going towards smooth finish black hammerite on this section, any arguments against or for?????

All comments welcome

David
williamsclio1 is online now   Reply With Quote
Old 05-11-2009, 10:28 AM   #2
williamsclio1
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Oct 2009
Posts: 850
Thanks: 663
Thanked 343 Times in 225 Posts
Garage
Quote:
Originally Posted by FRP432
Cool, keep it coming mate as I've got to do the same on 432! I'd love to get all the rear suspension rebuilt too but I need to save more bunce for that!

Jim
FRP432

Will do mate, was going to do more this evening but decieded to watch the Liverpool Game, so livid :cry:

Quote:
Originally Posted by speedline
Mine has been done with Bilt and Hamber products.
yer been reading up on this today and going to buy the following car care pack BILT-HAMBER WINTER CARE KIT

http://www.bilthamber.com/bilthamber-special-offers.php

Ok quick update, after being to the hospital today for my EEG scan it looks as though i wont be able to drive for a year :cry: :cry: :cry: :cry: :cry: :cry: :cry: wont know for sure untill the results come back in a couple of weeks so its not looking good

Absoultley gutted as only had my licence back for less than year as i was bannded for 9 months for drink driving ops: ops:

So as i cant use the car for a year :cry: i have decided that i may as well strip the whole under carriage and really go to town, as well as getting the car to concourse condition over the next 350 days.

Will be having to move the car on to the drive for the extra space for the rear beam, fuel tank suspension etc.

So first things first i need a car cover.

I know i said i would rather not use my car during the winter but i didnt mean for an entire year

A very gutted David
williamsclio1 is online now   Reply With Quote
Old 05-11-2009, 10:55 AM   #3
steveo3002
Mr Sparkle
 
steveo3002's Avatar
 
Join Date: Jan 2006
Location: nr cambridge
Posts: 9,471
Thanks: 297
Thanked 1,213 Times in 913 Posts
Send a message via MSN to steveo3002
id suggest you go alot further with the wirebrushing....keep on at the rust until it comes off and leaves silver metal

a wire wheel in a grinder or drill would be best

skip this stage and you might as well not bother ...you need to remove the rust best you can , not just paint over it and hide it
steveo3002 is online now   Reply With Quote
Old 05-11-2009, 01:32 PM   #4
williamsclio1
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Oct 2009
Posts: 850
Thanks: 663
Thanked 343 Times in 225 Posts
Garage
Yeh that was just a quick brush on the screw attached to the chassis not started on the rust yet, hopefully be making a good start over the weekend wether permitting.
williamsclio1 is online now   Reply With Quote
Old 05-11-2009, 02:39 PM   #5
vaughanmc
Washmitt Meister
 
vaughanmc's Avatar
 
Join Date: Jun 2009
Location: Scotland
Posts: 268
Thanks: 1
Thanked 97 Times in 42 Posts
Send a message via MSN to vaughanmc
What I'm going to be doing with my Nova Sport is wire-brushing all the underneath until the good metal comes out - Maybe a couple of coats of Etch Primer, a few generous coats of black Stonechip then another few layers of Hammerite Smooth White then the inner panels such as door internals, quarter panels, box sections etc will be done with Waxoyl

Should be good to see how you go about it
vaughanmc is offline   Reply With Quote
Old 05-11-2009, 07:28 PM   #6
williamsclio1
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Oct 2009
Posts: 850
Thanks: 663
Thanked 343 Times in 225 Posts
Garage
going for the following had some great reviews

BILT-HAMBER WINTER CARE KIT

http://www.bilthamber.com/bilthamber-special-offers.php

Not sure on what paint to use as a final finish and what colour as yet but going to call Bilt - Hamber and se what they recommend, been told there very helpful.

Will keep the updates coming, had intended on doing a lot this weekend but i have a friends BMW to detail so depending on wether etc will depend on what i manage to do.

David
williamsclio1 is online now   Reply With Quote
Old 06-11-2009, 02:26 PM   #7
ChrisJD
OCD Sufferer (Obsessive Car Detailer)
 
ChrisJD's Avatar
 
Join Date: Apr 2009
Location: Essex
Posts: 1,582
Thanks: 115
Thanked 403 Times in 333 Posts
Garage
Sorry to hear you'll not be able to drive for a year.

Good luck on the restoration project, look forward to further updates.

Have you considered painting the underside in the top surface blue?

Chris.
ChrisJD is offline   Reply With Quote
Old 06-11-2009, 02:29 PM   #8
738ALR
Washmitt Meister
 
738ALR's Avatar
 
Join Date: Sep 2009
Posts: 216
Thanks: 147
Thanked 90 Times in 67 Posts
Garage
I've used a gel called jenolite before (might be similar to the bilt hamber one), simply brush on, leave for a while and then use a wire brush to remove. Apparently it 'kills' the rust aqnd stops the oxidisation process.

Just my 2p's worth!
738ALR is offline   Reply With Quote
Old 06-11-2009, 02:37 PM   #9
snapsnap
Washmitt Meister
 
Join Date: Jul 2008
Posts: 224
Thanks: 33
Thanked 31 Times in 21 Posts
If you have something rusty and it can be immersed, Deox C will blow your mind!
snapsnap is offline   Reply With Quote
Old 07-11-2009, 08:04 PM   #10
williamsclio1
OCD Sufferer (Obsessive Car Detailer)
 
Join Date: Oct 2009
Posts: 850
Thanks: 663
Thanked 343 Times in 225 Posts
Garage
Quote:
Originally Posted by ChrisJD View Post
Sorry to hear you'll not be able to drive for a year.

Good luck on the restoration project, look forward to further updates.

Have you considered painting the underside in the top surface blue?

Chris.
Yeh really gutted but nothing i can do about it i suppose

Yeh thinking that would be the best way to go, so then it would be a case of finding a similar match to the body colour in a make which is suitable for underside of the car.

David
williamsclio1 is online now   Reply With Quote
The Following User Says Thank You to williamsclio1 For This Useful Post:
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors