Detailing World  

Go Back   Detailing World > Detailing Products > Polish/Cleaners/Compounds/Glaze
DW Home Forum Home Merchandise Store Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Polish/Cleaners/Compounds/Glaze Discuss Polish/Cleaners/Compounds and Glaze here - Sponsored By g3pro

Reply
 
Thread Tools Display Modes
Old 27-03-2007, 05:37 PM   #1
Ant W
Sponge Jockey
 
Ant W's Avatar
 
Join Date: May 2006
Location: Manchester
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
Question correct use of the Klasse twins?

I decided to take advantage of the sunny weather and gave the car another clean Anyway main purpose was to clay the car and use my recently purchased Klasse AIO and Klasse Sealent

The question I have, when applying the Klasse AIO and the sealent do you have to wipe it off straight away?

Reason I ask, I did a door with Klasse AIO and moved onto the next door, intending to wipe off the first door as I finished applying the AIO to the second door. Thing is, it was a bugger to remove? It seemed to cure fairly quickly and without firm pressure it would have left marks from the applicator pad.

Having got the AIO off, I left the sealent on thinking it would be best to let it cure... and faced a similar problem

I applied the AIO on a damp pad, and the sealent on a dry. For each door I used a 5p sized blob of product so don't think I used too much?
Ant W is offline   Reply With Quote
Old 27-03-2007, 05:56 PM   #2
steveo3002
Mr Sparkle
 
steveo3002's Avatar
 
Join Date: Jan 2006
Location: nr cambridge
Posts: 9,524
Thanks: 312
Thanked 1,240 Times in 934 Posts
Send a message via MSN to steveo3002
aio is pretty fool proof, you should be able to wipe it straight off or leave it a bit to make sure the protection part of it has set up fully...chances are you used a bit too much

sealant glaze needs to be used so its almost invisible ...a damp mf will help with removal
steveo3002 is offline   Reply With Quote
Old 27-03-2007, 06:03 PM   #3
GAZA62
OCD Sufferer (Obsessive Car Detailer)
 
GAZA62's Avatar
 
Join Date: Jan 2007
Location: KENT
Posts: 2,292
Thanks: 4
Thanked 18 Times in 17 Posts
Had this prob with some AG EGP other week left it on for an hour which ive never done before usually leave it for around 20 mins or as i finish the car i go back where i started and buff off thats what i will do next time i put it down to the warm sun.
GAZA62 is offline   Reply With Quote
Old 27-03-2007, 07:21 PM   #4
Tone
PC Perfectionist
 
Tone's Avatar
 
Join Date: Oct 2005
Location: Bucks
Posts: 406
Thanks: 5
Thanked 3 Times in 3 Posts
I just finished applying some AIO to the car today. I used the PC with a QD'd pad. Tiny line of product and worked it till it was almosr clear. I did the whole car and buffed it off with a QD'd MF. Came off fine. As steveo said, you may have used too much product. Less is more with the twins
Tone is offline   Reply With Quote
Old 27-03-2007, 09:08 PM   #5
Alan W
Distinguished Detailer
 
Alan W's Avatar
 
Join Date: May 2006
Location: Southside
Posts: 7,109
Thanks: 1,205
Thanked 2,921 Times in 2,244 Posts
Garage
If you're topping AIO with SG you don't need to let the AIO dry before removing it. The only time you'd leave the AIO to dry would be if you weren't going to top it with anything and wanted the little protection that AIO would afford on it's own.

Alan W
Alan W is offline   Reply With Quote
Old 27-03-2007, 09:49 PM   #6
Ant W
Sponge Jockey
 
Ant W's Avatar
 
Join Date: May 2006
Location: Manchester
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
thanks for the replies, thinking back maybe I did use too much on the door that was causing me the most aggro

By the time I was on the rear quarter panel it wasn't so bad.

Also handy to know that you don't need to let the AIO totally dry
Ant W is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:30 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors