Greetings to you all.:wave:
The last few days here at Swell Detail Store we had the joy of working on a VW Polo GTI for an Enhancement Detail
The car was in very good condition, suffering from the usual swirls and a few RDS on each and every panel.
We started the procedure by taking measurements using the PTG:
For the majority of the correction process we used Scholl S17 with a LC hydro cutting pad or meg's mf pad on the Flex VRG.
A 50/50 on the car's roof:
And some before and after shots:
To finish of our work, we worked with Auto Finesse Rejuvenate and a LC constant pressure polishing pad.
All the external trim parts were dressed using Auto Finesse Revive .
The glass surfaces were cleaned using το Auto Finesse Crystal.
Tires dressed with Zaino Z16 .
As far as protection is concerned, the finish was first sealed using Swissvax Shield, and then waxed with Swissvax concorso leaving 4 hours between coats.
The result was fabulous as expected.
Some exterior shots of the car:
Thanks for reading this post!
The last few days here at Swell Detail Store we had the joy of working on a VW Polo GTI for an Enhancement Detail
The car was in very good condition, suffering from the usual swirls and a few RDS on each and every panel.
We started the procedure by taking measurements using the PTG:
For the majority of the correction process we used Scholl S17 with a LC hydro cutting pad or meg's mf pad on the Flex VRG.
A 50/50 on the car's roof:
And some before and after shots:
To finish of our work, we worked with Auto Finesse Rejuvenate and a LC constant pressure polishing pad.
All the external trim parts were dressed using Auto Finesse Revive .
The glass surfaces were cleaned using το Auto Finesse Crystal.
Tires dressed with Zaino Z16 .
As far as protection is concerned, the finish was first sealed using Swissvax Shield, and then waxed with Swissvax concorso leaving 4 hours between coats.
The result was fabulous as expected.
Some exterior shots of the car:
Thanks for reading this post!