Detailing World  

Go Back   Detailing World > Detailing Products > The Official DetailingWorld™ Review Section > LSP
DW Home Forum Home Merchandise Store Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 28-01-2017, 03:34 PM   #1
WHIZZER
T-Cut King (admin)
 
WHIZZER's Avatar
 
Join Date: Oct 2005
Location: On DW
Posts: 27,910
Thanks: 11,794
Thanked 17,034 Times in 6,335 Posts
Garage
Detailingworld™ Review Dr Beasley Plasma Coat

Detailingworld™ Review Dr Beasley PlasmaCoat


Introduction:

Dr Beasleys Plasma Coat



Who Are Dr Beasleys

We’re a team of detailers, chemists, enthusiasts, and car nuts who design, formulate, and manufacture detailing products.

We set out to create the best detailing products available. Choosing high quality ingredients while eliminating harmful chemicals from our formulas allows us to produce the safest, highest quality products possible.

There’s a better way to detail your car. Let us show you how.

Jim Lafeber, president and founder of Dr. Beasley’s, originally founded a detailing shop in Chicago called Simon’s Shine Shop. We used the best products available at the time, and came away disappointed with all of them. From harsh car wash soaps to greasy leather conditioners, we saw room for improvement across the board.

Jim knew there was a better way,and decided to create products of his own. After perfecting his formulas and successfully using them in his shop he decided to make them available to the public. This is where Dr. Beasley’s was born.



The Product:

The Product arrived from the US direct – packaged well arrived via courier –

What the Manufactuer says

PlasmaCoat is the answer to a question that other manufacturers haven’t even begun to ask yet: “How can we eliminate all health and environmental concerns caused by sealants and waxes?” Waxes and polysealants use heavy solvents in their formulations which emit harmful chemicals called VOCs (Volatile Organic Compounds). These compounds lead to serious long term health and environmental problems.

We knew we needed a paint protection product without these VOCs, and that meant completely rethinking what a paint protection product looks like. So we set about designing a water based coating formulated with multifunctional plasma technology. The end result isn't a wax, and it isn't a polysealant. It's plasma. And this nano coating is 100% VOC Free.

Even though we went well out of our way to make sure that this product is safe, in no way did we sacrifice performance. After all, it’s our mission to provide the highest quality detailing products possible. So while it is the first 100% VOC free paint coating ever, it also bonds instantly and lasts for years. Quite simply, it's the most effective paint protectant there is.

Most protectants need to sit on the paint and haze before removal, and then even after the product is removed it takes 24-48 hours before the product has fully bonded to the paint. PlasmaCoat bonds the instant that it comes into contact with the paint surface. This means no more waiting around or worrying about the rain after you’ve sealed your car. The other, possibly most important, aspect of PlasmaCoats performance is its sheer durability. Paint sealants usually last about 6-8 months, and waxes only 6-8 weeks. PlasmaCoat will remain bonded to your paint for well over a year.

Most people seem to recognize that one of the main drawbacks to using polymer paint sealants is that the shine they produce can be quite flat and "mirror-like". This is a symptom of a polymer's limiting molecular structures which don't allow for optimal clarity or depth. PlasmaCoat doesn't rely on these structures and our multifunctional plasma technology allows for a very rich, satisfying shine.




The Method:

This was used on paintwork that was pre washed and ready for a coating –

Following the recommended application the- crème was applied via the applicator that was provided in circular motions and once around half a panel was covered it was buffed using microfiber towel

Plasma


Supplied applicator


Was expecting a hard style wax but was presented with a cream style paste


Applied to the applicator


Then applied to the paint in circular motions



You can see the application here




Then as soon as half a panel was covered began to buff ( in this case I left slightly longer as trying to take photos and it got a little grabby)







Finished buffing





Crisp final finish







Test with spritzed water



and to see when water was poured over




And final buff



Price:

$39.99 for 4oz tub (£40.78 4oz uk)

Can be purchased from Dr Beasleys

http://www.drbeasleys.com/plasmacoat...ription_tabbed


Would I use it again?:

Yes, something different to the normal spray sealant or wax. Easy to apply and hopefully will provide good protection. Left a Crisp clean sharp Finish in what were dull conditions.

Conclusion:

Something different to the protection market – a cream paste “plasmacoat” that is easy to apply , really is a simple wipe on , wipe off product that leaves a great shine and you don’t need to worrying about curing times – So if you are looking for something to protect your car that’s simple to use this could be for you



"Detailingworld™ reviewer has followed the Manufacturers Instructions and accepts no responsibility to any circumstances arising from any member using these products or following this test "
__________________
WHIZZER is offline   Reply With Quote
The Following 2 Users Say Thank You to WHIZZER For This Useful Post:
mrbig1 (28-01-2017), todds (28-01-2017)
Old 03-02-2017, 02:15 PM   #2
WHIZZER
T-Cut King (admin)
 
WHIZZER's Avatar
 
Join Date: Oct 2005
Location: On DW
Posts: 27,910
Thanks: 11,794
Thanked 17,034 Times in 6,335 Posts
Garage
after a weeks awful weather of rain and dirty roads this is the beading
__________________
WHIZZER is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:56 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
DTO Garage vBulletin Plugins by Drive Thru Online, Inc.

vB.Sponsors