Hi everybody,
It has been quite a while since I was not able to post in to the forum.
Anyways, I would like to share some more detailing I have done last week to my 308.
It has been 1 year and 1 month since I bought my baby. It has covered around 18k kms(around 12k miles I suppose). The paintwork was well looked after, but since I was planning to apply Gtechniq Crystal Serum Light + Exov2 combo; I spent some time to tidy it up!
Here are my buddies
I first decontaminate the paintwork with AutoFinesse ObliTARate to get rid of some tar spots. Then, used iron fallout remover to remove any iron contamination both on paintwork and on the alloy wheels. Then I softly clay the whole car. Here is a shot of the clay bar after only half of the roof!
Then, I moved to polishing. I polished the car with Scholl S40, I used 3M extra fine on a 3M yellow waffle polishing pad on some panels such as backlid and rear bumper to get rid of some swirls and then the whole car is polished with Scholl S40 on a Lake Country finishing pad with Makita Rotary polisher and brought back a little pop to the paint and remove some marrings the clay left over.
Finally, I apply 1 coat of Gtechniq Crystal Serum Light and 2 coats of Exov2. The left over from the CSL is also applied to the alloy wheels. I am curious to see how they perform and last!
I guess I will not need any treatment for the coming two years or so.
And here are the final shots after 2 days of hard work
I hope you like it!
Cheers :thumb:
It has been quite a while since I was not able to post in to the forum.
Anyways, I would like to share some more detailing I have done last week to my 308.
It has been 1 year and 1 month since I bought my baby. It has covered around 18k kms(around 12k miles I suppose). The paintwork was well looked after, but since I was planning to apply Gtechniq Crystal Serum Light + Exov2 combo; I spent some time to tidy it up!
Here are my buddies
I first decontaminate the paintwork with AutoFinesse ObliTARate to get rid of some tar spots. Then, used iron fallout remover to remove any iron contamination both on paintwork and on the alloy wheels. Then I softly clay the whole car. Here is a shot of the clay bar after only half of the roof!
Then, I moved to polishing. I polished the car with Scholl S40, I used 3M extra fine on a 3M yellow waffle polishing pad on some panels such as backlid and rear bumper to get rid of some swirls and then the whole car is polished with Scholl S40 on a Lake Country finishing pad with Makita Rotary polisher and brought back a little pop to the paint and remove some marrings the clay left over.
Finally, I apply 1 coat of Gtechniq Crystal Serum Light and 2 coats of Exov2. The left over from the CSL is also applied to the alloy wheels. I am curious to see how they perform and last!
I guess I will not need any treatment for the coming two years or so.
And here are the final shots after 2 days of hard work
I hope you like it!
Cheers :thumb: