|DW Home||Forum Home||Merchandise Store||Register||FAQ||Members List||Calendar||Search||Today's Posts||Mark Forums Read|
|The Studio The place the Detailing World Supporters display their work for viewing : This is a subscription section you will need to go to your userCP (top left of the page) and select Paid Subscriptions for more information.|
||Thread Tools||Display Modes|
|14-05-2012, 12:51 PM||#1|
AMDetails - Phantom Black Audi RS4 Correction.
So today’s write up is of a gorgeous Phantom Black Audi RS4. This particular vehicle has had some very subtle mods Milltek exhaust and I believe it’s on its 3rd remap of tweaking. So with the stance and power sorted, all the customer needed was the paint work looking at. So we went for a 2 stage correction detail to remove the swirls and paying particular attention to some of the customers chosen areas.
On arrival the usual Moray road grim due to our 4 seasons in one day weather.
So after an initial vehicle rinse it was on to the wheels. With Acid free wheel cleaner and a 1” detailing brush. Megs and vikan brushes used for the inner wheel.
Then a nice layering of foam and to tackle the door shuts.
All this was then rinsed down. I think the good old Moray rain must have then come on from that overcast cloud as there is now only Paint work images on the SLR.
The usual De Tarr with Tardis, De iron with Iron X and then clay bared with a mild Claybar.
The majority of panels were tackled using 1-2 cycles of Scholl S17+ on 3M wool pads. Then after they were refined with S40 on 3M yellow pads. Bumpers and more intricate areas 3M Green 75mm and yellow 75mm pads were used.
Some more 50/50s
Shiny Shiny Milltek
After all the machining it was then outside to clean again.
I do like the De-Badged look its stealth. But once the new badges were put on it really does finish the vehicle.
Getting all the dust out of the nooks and crannies.
Once back inside the whole vehicle was blown dry and the first coat of wheel wax went on the lovely refurbed alloys.
Then 2 coats of Synthetic paint sealant. Then off to bed!
Next day was collection day and the sun actually came out!
So out went the PHOAAAR for some pictures.
My Favourite Shot
Then it was back inside for the usual portfolio shots @ AMDetails
Thanks for taking the time to look.
Local to The Highlands? We are based in Elgin, Moray, IV30 6ND Just 40 minutes east of Inverness.
|The Following 11 Users Say Thank You to AMDetails For This Useful Post:|
|14-05-2012, 12:55 PM||#2|
Join Date: Jan 2012
Thanked 477 Times in 412 Posts
nice work i like the 50:50 shots
|The Following User Says Thank You to DetailedClean For This Useful Post:|
|14-05-2012, 01:04 PM||#6|
Join Date: Oct 2010
Location: Walmer Bridge, Preston
Thanked 3,856 Times in 2,722 Posts
Great work, i agree with you about the badges - im not a fan of the debadged look!
Amazing correction though, looking superb!
|The Following User Says Thank You to JBirchy For This Useful Post:|
|50/50 photos, amdetails, audi rs4 detailing, elgin, phantom black|
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|