Detailing World Forum banner

New durability test, kamikaze, dodo infinity...

14K views 23 replies 6 participants last post by  Alasar 
#1 ·
Hello to all!

I started new test. In test will be participating new coatings and proven as well. From new for me is Kamikaze:



not very new - Dodo Infinity Sealant.



and already tested - Gtechniq Serum, C1, EXO.

The only point - for gtechniq coating I will use as a top layer - sample coat.

The test will be hard. Protective coating will apply on the prepared test panel without warm IR. After 12-24 hours the panel will go outside. After 3-4 days, the panel will be washed with a shampoo apc 12.5 pH. 1-2 washing and then again go to outside. If it will be raining, the panel go to outside after 24 hours. if will be the sunny - after 12. The same situation like detailers return cars to clients.

planned participants:
Gtechniq Crystal Serum + Sample coat (layers 1+1)
Gtechniq С1 + Sample coat (1+1)
Kamikaze 1 , 2 layers + Overcoat
Dodo Infinity sealant + Sample (1+1)
Gtechniq Crystal Serum + Sample + EXO (1+1+1)
Gtechniq Crystal Serum + EXO (1+1)
 
See less See more
2
#4 ·
I can't imagine that someone choosing to use a product such as these coatings would opt for a wash that isn't wax or sealant safe.

It's interesting sometimes to see how resistance such coatings can be but the majority of the time anything this harsh would never get close to these coatings
 
#5 ·
On next day after application.

"Darkening":









participants from left to right:

1. Crystal Serum + sample topcoat (1+1)
2. C1 + sample topcoat 1+1
3. Kamikaze 1 layer (upper half zone + overcoat after 24 h)
4. Kamikaze 2 layers (upper half zone + overcoat after 24 h)
5. Sample coat #1 +sample topcoat 1+1
6. Dodo Infinity + sample topcoat 1+1
7. Crystal Serum + sample topcoat + EXO 1+1+1
8. sample top сoat 1 layer, two variants
 
#12 · (Edited)
let's get started. In 5 days I started washing the test panel.

Water beading and sheeting after 2 high alkaline washes.



be careful - very loud )))

participants from left to right:

1. Crystal Serum + sample topcoat (1+1)
2. C1 + sample topcoat 1+1
3. Kamikaze 1 layer (upper half zone + overcoat after 24 h)
4. Kamikaze 2 layers (upper half zone + overcoat after 24 h)
5. Sample coat #1 +sample topcoat 1+1
6. Dodo Infinity + sample topcoat 1+1
7. Crystal Serum + sample topcoat + EXO 1+1+1 (exo only in upperside)
8. sample top сoat 1 layer, two variants

leaders:
Crystal Serum + sample topcoat and
Crystal Serum + sample topcoat + EXO 1+1+1

after them:
Dodo Infinity + sample topcoat 1+1
Sample coat #1 +sample topcoat 1+1
C1 + sample topcoat 1+1
 
#15 · (Edited)
Water beading after 10 washes:



participants from left to right:
1. Crystal Serum + sample topcoat (1+1)
2. C1 + sample topcoat 1+1
3. Kamikaze 1 layer (upper half zone + overcoat after 24 h)
4. Kamikaze 2 layers (upper half zone + overcoat after 24 h)
5. Sample coat #1 +sample topcoat 1+1
6. Dodo Infinity + sample topcoat 1+1
7. Crystal Serum + sample topcoat + EXO 1+1+1 (exo only in upperside)
8. sample top сoat 1 layer, two variants
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top