View Full Version : Laboratory test results for GYEON coatings

Gyeon Jeremy
19-12-2014, 12:04 PM
We're happy to announce, that we recieved lately test results from the leading and best known Asian verification, testing and certification company KTR, the Korean Testing and Research Institute.

We've undertaken serious and independent tests on our 3 well known coatings: Q Prime, Q Mohs and Q Mohs+. Each of them proves outstandingly well in the test categories. Mind, that all of our coatings reach 9H hardness!!! We're not going to report about the improvement in gloss, because that is obvious for most of you ;)

http://i1274.photobucket.com/albums/y421/GYEON/3_zps8276b923.jpg (http://s1274.photobucket.com/user/GYEON/media/3_zps8276b923.jpg.html)

http://i1274.photobucket.com/albums/y421/GYEON/1_zps281c9117.jpg (http://s1274.photobucket.com/user/GYEON/media/1_zps281c9117.jpg.html)

http://i1274.photobucket.com/albums/y421/GYEON/2_zps5d59ce21.jpg (http://s1274.photobucket.com/user/GYEON/media/2_zps5d59ce21.jpg.html)

19-12-2014, 12:22 PM
What was it tested on?

Gyeon Jeremy
19-12-2014, 12:41 PM
On standard automotive paint with clearcoat. A picture of the paint the test was proceeded on for Prime:

http://i1274.photobucket.com/albums/y421/GYEON/4_zpsbf220110.png (http://s1274.photobucket.com/user/GYEON/media/4_zpsbf220110.png.html)

Mike lambert
19-12-2014, 01:25 PM

19-12-2014, 06:17 PM
What was hardness of paint?

19-12-2014, 08:49 PM
Currently got prime on mine so this is welcoming news! [emoji106]

20-12-2014, 05:36 PM
All the same hardness, so the only differents between the coatings are gloss level by 1/2 more marks?

21-12-2014, 01:11 AM
Using bathe + wetcoat and cure is it possible to layer these products and the cure time between layers and in which order to the products

21-12-2014, 01:12 AM

21-12-2014, 01:16 AM
2014 astra sri prep done meguiars ultimate compound ultimate polish and nxt ge tech wax done 4 weeks before Bathe + and wetcoat...