Thread: Da with SRP
View Single Post
Old 15-04-2017, 09:34 AM   #10
Unwashed Member
Join Date: Oct 2012
Location: York
Posts: 23
Thanks: 0
Thanked 3 Times in 3 Posts
Originally Posted by lowejackson View Post
Splatter is normally too much product or working at high speed setting. SRP is great but don't treat it like a conventional polish like 205, slow speed with a finishing pad is all that is required. No need to work the SRP for many passes
I see - I was using the DAS6 on setting 1 to get the SRP across the panel area and then up to 4.5 to work the product (using 4 bean sized blobs on a blue 3m pad).

I'll try half the product over a smaller area on a setting of 2.3-3 and see how it fares. I also gave a squirt of QD, which I'll go a bit lighter on as well.

Cheers for the advice,

Munkee1805 is offline   Reply With Quote