View Single Post
Old 13-06-2018, 08:48 PM   #8
Unwashed Member
pubcrawler's Avatar
Join Date: Jun 2018
Posts: 5
Thanks: 0
Thanked 2 Times in 2 Posts
Originally Posted by EG30 View Post
Hi pubcrawler great to see you back.

Polishing machines, pads and polishes has come a long way in the last 8 years.

Your car's paint is rock hard, there are harder paints around but not many ie ceramiclear Merc paints, Lambos etc. On a scale of 1 to 10, it would be around 9 on the scale.

The porter cable is inadequate with weak ( by today's standards ) old school motor that is also noisy. 8mm throw grossly insufficent also when you factor in a couple of mm lost in pad flex as well. Luckily there are plenty of cheap chinese 15mm DA avail on ebay, aliexpress etc that is the same as the DAS 6 pro plus.

In terms of polishes, what type of defects do you need to remedy?

For RIDS I would recommend MF pad such as the Buff and Shine URO fibre+compounds such as Scholl S3 XXL, Menz 400, 3D 501 etc and for minor swirls Scholl S20 black + navy spider pad; this combo will finish down very well with your hard paint there will be very little need to use a softer pad+finer polish like one might need on soft paints.
Thanks for info, just ordered some Scholl SP20 and the navy spider pad. Will have a look around for some polishing machines the PC was getting a bit worn so need an upgrade. Anything I should be looking for?
pubcrawler is offline   Reply With Quote