View Single Post
Old 08-12-2016, 08:56 PM   #1
Unwashed Member
Join Date: Nov 2016
Posts: 23
Thanks: 0
Thanked 2 Times in 1 Post
Machine Polishing/Compounding PTG

Say I want to machine polish a bonnet using a DAS PRO PLUS with 15mm throw, what is the general rule of thumb on returning to this area again. How many times can you give an area the paint correction treatment before you have removed too much clear coat.

I know this is a broad question which leads me onto my next question.

I've read the only way to truly know is to use a PTG, which one is good for someone who does not want to break the bank but needs something in their tool kit as a beginner, and also in terms of the readings when is it too low to even think about reaching for the compound?

Looking for a general rule of thumb for when you don't have a PTG, and a recommendation for a good entry level PTG and some info on what the readings mean?
jahk86 is offline   Reply With Quote