1 Step Compound?

[Mikesphotaes]

Originally Posted by Moet1974

I'd revisit this polish Mike. Suspect you need to up the pad a little. The polish has plenty of bite and finishes very well. For moderate swirls it's a nice product bud!

Might give it a try with orange pads sometime but certainly didn't get the gloss that euge07 got, not a patch on Megs 205.

[euge07]

Originally Posted by Mikesphotaes

Might give it a try with orange pads sometime but certainly didn't get the gloss that euge07 got, not a patch on Megs 205.

what colour is your car?



one pass 04/06 on orange pad, rupes polisher

[Autoglym]

Our Rapid Renovator is a single stage, no filler compound. Obviously it will have its limits as to what it can achieve, but it was designed as a single stage to leave a surface that does not require any further finishing after use, just protecting.

More info here: http://www.detailingworld.co.uk/foru...apid+renovator

[percymon]

I did the other half's MINI with Menz 2400, and thought it looked pretty good in terms of depth of shine and swirl removal. But after refining with ''4000'' (they've changed the names yet again recently) i could see an improvement in colour intensity and gloss.

I wouldn;t trust myself with FG400, its a heavy cut compound, which i wouldn;t imagine is going to achieve good clarity and depth. I suppose it depends how bad the paint is you are staring with, and then the decision whether you want 99% defect removal with compromised clarity, or leave a few deeper defects for good gloss/depth.

Any single stage polish will be a compromise

[Joel79]

Angelwax Regenerate is amazing stuff and so is Nanolex medium cut.

[E60525d]

Thank you all for the replies.

It looks like a few people are getting mixed up between FG400 and Heavy Cut 400.

Menzerna describe the Heavy Cut 400 as a 1 step polish which compunds and finishes really well - http://www.cleanyourcar.co.uk/car-po...prod_1096.html

I am going to go with this. Was also thinking that I can do a 2nd quick stage of a a finishing polish if required.

[great gonzo]

Originally Posted by E60525d

Thank you all for the replies.

It looks like a few people are getting mixed up between FG400 and Heavy Cut 400.

Menzerna describe the Heavy Cut 400 as a 1 step polish which compunds and finishes really well - http://www.cleanyourcar.co.uk/car-po...prod_1096.html

I am going to go with this. Was also thinking that I can do a 2nd quick stage of a a finishing polish if required.

I thought heavy cut 400 was FG400, which can REALLY remove clear coat.


Gonz.

[derbigofast]

The best I've come across so far is autosmart evo3 and that's on vw paint

	Autosmart People like you become Autosmart Franchisees

[E60525d]

Originally Posted by great gonzo

I thought heavy cut 400 was FG400, which can REALLY remove clear coat.


Gonz.

Your right, CYC website shows both heavy cut 400 and FG400 as 2 products.

Yes the cut level is high at 8/10 but according to Menz it also finishes well.

For example, I have just finished a bottle of Menz Intensive Polish which was rated at 7/10 cut. This used to be there medium cut polish which everyone used to rave about.

HC400 has a slightly heavier cut but everyone seems to be saying how strong it is and best avoided! Its only slightly stronger but finishes way better.

[brba]

Bought Scholl s20 black today , veeery nice !!!! medium orange pad





Sent from my iPhone using Tapatalk