Durability test with coatings - Page 8

LuckyStrike · 23-10-2016, 01:05 PM

I suppose that you applied MOHS at inside with low humidity, proper temperature and let it cure at least 12+ hours.

Is it possible that coating is "clogged"?

What prewash products you have used?

GeorgeS · 23-10-2016, 01:20 PM

Quote:

Originally Posted by LuckyStrike

I suppose that you applied MOHS at inside with low humidity, proper temperature and let it cure at least 12+ hours.

Is it possible that coating is "clogged"?

What prewash products you have used?

mohs was applied in a dust free climate controled spray cabin!

cured for 48 hours, then applied the gyeon cure, car was 3 stage polished, cleaned by a foam from nanolex pre wash (2x) air dryed the car, full wipe of gyeon prep... then every panel be for the coat prep again with gyeon prep.

imo the prep work was 110% done right!

Alasar · 23-10-2016, 05:23 PM

George. What model of your car?

GeorgeS · 23-10-2016, 08:18 PM

Quote:

Originally Posted by Alasar

George. What model of your car?

Opel insignia OPC carbon black

LuckyStrike · 24-10-2016, 11:25 AM

Quote:

Originally Posted by GeorgeS

mohs was applied in a dust free climate controled spray cabin!

cured for 48 hours, then applied the gyeon cure, car was 3 stage polished, cleaned by a foam from nanolex pre wash (2x) air dryed the car, full wipe of gyeon prep... then every panel be for the coat prep again with gyeon prep.

imo the prep work was 110% done right!

Seems perfect prep in my eyes too.

Gyeon claims that MOHS:

"It is able to maintain 80% of its original hydrophobic properties and to last on the paint throughout a period of at least 12 months."

and pairing MOHS with Booster:

"Based on a quartz coating like Q2 Prime or Q2 Mohs, Booster will prolong total beading by up to 12 months."

Refer to these claims, there should be up to 24-30 months durability + you have used Cure as drying aid.

Can you name prewash products you have used?

GeorgeS · 24-10-2016, 04:19 PM

Nanolex soap, gyeon Bath, monnello foam

armufti · 24-10-2016, 05:38 PM

That si3d stuff is amazing. Will have to order myself a bottle

Sent from my SM-N910C using Tapatalk

Berylburton · 24-10-2016, 07:19 PM

I have never used Mohs only Prime. But a good friend of mine has. It is still going strong after 18 months.

LuckyStrike · 24-10-2016, 10:11 PM

Quote:

Originally Posted by GeorgeS

Nanolex soap, gyeon Bath, monnello foam

Nanolex Pure, Gyeon Bathe and Monello Artico Magico Foam are PH-neutral stuff, so shouldn't affect negatively to Gyeon coatings.

IMO, coating might be clogged and you should try next wash time some tar/fallout removers and maybe some soft clay.

or something has gone wrong in application

or there's something "tricky" on your clearcoat. For example at Finnish detailing forum, there's one member which have problems with even waxes. He gets only about 2-3 weeks durability with Bilt-Hamber Finis-Wax (when i get 6+ months at Finnish winter time).

Does anyone else have ideas?

sm81 · 16-11-2016, 09:11 PM

Any new videos?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23-10-2016, 01:05 PM	#71
LuckyStrike PC Perfectionist Join Date: Feb 2012 Posts: 313 Thanks: 83 Thanked 200 Times in 83 Posts	I suppose that you applied MOHS at inside with low humidity, proper temperature and let it cure at least 12+ hours. Is it possible that coating is "clogged"? What prewash products you have used?

23-10-2016, 05:23 PM	#73
Alasar International Detailer Join Date: Dec 2010 Location: Kyiv Posts: 248 Thanks: 107 Thanked 219 Times in 76 Posts	George. What model of your car?

24-10-2016, 04:19 PM	#76
GeorgeS Unwashed Member Join Date: Jun 2016 Posts: 13 Thanks: 0 Thanked 1 Time in 1 Post	Nanolex soap, gyeon Bath, monnello foam

16-11-2016, 09:11 PM	#80
sm81 Distinguished Detailer Join Date: May 2011 Posts: 5,992 Thanks: 2,661 Thanked 1,152 Times in 1,019 Posts	Any new videos?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)