Detailing World Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter · #1 ·
hello,
today i detailing the hood.

The processe :
1. Washing the hood + drying
2. Clay
3. Polish:
Compound= ultimate compound + yellow pad meguiras
Finish = ultimate polish + black pad meguiras
4.Chemical guys black light
5.Dodo juice acrylic spritz

picture before:



picture after :







What u think?

70 % of the swirlls gone , But there is some swirlls .

maybe i needed use the cutting pad ?
 

·
Registered
Joined
·
139 Posts
Discussion Starter · #4 ·
thank u :)

1. Continue use the yellow pad over the whole car or maybe pick up the cutting pad?

2. this is how i working :
UC + yellow pad 2.0 meguiars - 3 dots on the pad , section working small , each section 4 pasess ( left to right +up and down 4 times ) ,
first i sperding the UC with speed 1
then i working on the section with speed 5 + very slow arm + preesure

ultimate polish+black pad 2.0 meguiars - 3 dots on the padn , working on small section , 4 pasess ( left to right +up and down 4 times ) ,
first sperding the UP on speed 1
then i working on speed 4 with light preesure

Continue working like thet^ ?
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top