Detailing World Forum banner
1 - 4 of 4 Posts

95 Posts
Discussion Starter · #1 ·
When I read this:

I thought it was a great idea, but no orders being taken, at present.

I ordered a puck off ebay, and had a go this afternoon.

I only took three pics, but it's an easy process.

Marked a thereabouts center line, and then the cut lines. I used a Japanese pull saw to cut down to the required depth.

A sharp wood chisel made esay work of cutting the rubber. Bevel side down, by the way, to stop the edge digging in.

Ten minutes, start to finish.

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.