I have a Karcher K7 that cost a fair old amount in 2017 but this weekend I fired it up and it has started pulsing at mid to high pressure. Works fine in snow foam mode, but turn the adjustable nozzle to half way and beyond, you get 1 second pressure, then it drops for 1 second and so on.
So do I bin it and just buy a replacement or is it worth a DIY fix or getting it professionally repaired. After the Covid lockdown, I am not exactly flush with cash
I had last used the washer to do a 20ft by 22ft patio scrub so not sure if this was too much. I must admit I will never buy Karcher again if I do replace.
So do I bin it and just buy a replacement or is it worth a DIY fix or getting it professionally repaired. After the Covid lockdown, I am not exactly flush with cash
I had last used the washer to do a 20ft by 22ft patio scrub so not sure if this was too much. I must admit I will never buy Karcher again if I do replace.