Detailing World Forum banner
21 - 40 of 374 Posts
Mine arrived yesterday just as I was drying the wife's car off.got it all mounted up and plugged in then got the water to it today.tryed it today just cleaning the drive a bit,it's a lot quieter than my old K2.Not sure if it's as powerful or maybe I don't have enough water pressure,I'll be hopefully getting a water butt in a couple of weeks to run it from.The kit has a 200mm lance in it plus a few other attachments so I'll try to suss out the size of the fittings and try to get a lance about 450mm long plus a quick disconnect for the trigger as I don't like hanging it from the hose.overall I'm pleased with the unit so far and look forward to using it on the cars.
 
just to update this thread,after much decorating and family commitments I finally got a chance to use my PW.i discovered a (half)kink in the hosepipe running to the back of my garage to where the tap is,sorted this and now its got great pressure.Just popped out and sprayed my vw transporter with BH auto foam in a pump sprayer (both new to me) then PW"ed it off,didn"t bother to dry it as its raining lightly,two weeks of winter road crud removed and the best bit,from opening the garage door to closing it took 13 minutes,which is why I wanted the static set up so im well pleased.:D
 
Discussion starter · #28 ·
Perhaps a silly question, but must these be wall mounted or fixed securely to the floor? I've been looking at their website but don't see any kind of mobile floor stand for them.
Mine is just on the floor. With a 15m hose I can get round the car without any need to move the actual machine.

Sent from my iPhone using Tapatalk
 
looking to order one of these now they are back in stock. Any updated discount codes for these? the code on post 1 doesn't work.
I bought one on Friday. The code is right but isn't enabled at the moment as they only have limited stock. That was straight from them as I messaged on Facebook enquiring about it. I just sucked it up and paid full whack.

Jack.
 
I’m just about to buy one of these but can you get a longer lance as the one in the pic looks rather short,,I’ve already got wall mounted hose with my Karcher lance with the 22mm fittings on each end but I’d like a new lance as mine is old now,also will the 22mm hose couple up to the pw or with I need to get a different connection to put in between.?

Andy.
 
Discussion starter · #35 ·
Thanks micksea,,I'll call them tomorrow & see what they can do for me.

Andy.
You won't be disappointed mate, it's a great machine [emoji106] And with or without the discount it's still a bargain!
Every time I use it I'm impressed (and a little annoyed that I didn't buy one sooner!)

Sent from my iPhone using Tapatalk
 
You won't be disappointed mate, it's a great machine [emoji106] And with or without the discount it's still a bargain!
Every time I use it I'm impressed (and a little annoyed that I didn't buy one sooner!)

Sent from my iPhone using Tapatalk
I was looking at a Kranzle but with the price of these I can buy 3 & still have some change.ive emailed them about what I need so hopefully I'll hear something back tomorrow,,if not I'll call them.i don't really need the hose as I got one from qwashers on a wall reel last year but if it comes with the pack it will be ok in case I need to use the pw elsewhere.Plus I'm due another snow foam bottle as I've had mine about 10 years now.

Andy
 
Discussion starter · #38 ·
*Update after 3 months use*

I've used it probably averaging twice a week for 3 months and the machine is still working as per day one. Was interested to see how it coped with the freezing cold weather but no problems at all.
The connectors are still just as smooth and easy to use and the motor still runs like a dream.

Overall, still really impressed with the whole package.

Next project is to fashion some sort of wall mounting brackets for the lances/attachments etc...
 
still liking mine too.i"ve set up a 100 litre water butt that feeds into a 1000 litre IBC and sods law its hardly rained here for the last three weeks,no worries I just plug the hose pipe into the PW.Im just looking at a wall bracket to for my nozzles and fittings too.I thought about a small shelf with holes in to slot the bits into but as I want to screw it to the same wood that my PW wall mount is on it might vibrate them out,currently thinking about a small,clear plastic tub (Tupperware type of thing) screwed to the wood under the PW,no good for lances though but if I get a 450mm lance at some point I might just add a metal,push in tool clip up the side of the PW.
 
*Update after 3 months use*

I've used it probably averaging twice a week for 3 months and the machine is still working as per day one. Was interested to see how it coped with the freezing cold weather but no problems at all.
The connectors are still just as smooth and easy to use and the motor still runs like a dream.

Overall, still really impressed with the whole package.

Next project is to fashion some sort of wall mounting brackets for the lances/attachments etc...
I purchased mine last month and although i only managed to use it a couple of times before going back to work i'm really impressed with it.

Great minds think alike pal, I'm currently fabbing up a wall bracket for nozzles and lances etc ( the perks of night shift offshore)
 
21 - 40 of 374 Posts