[Stephenmoore30]

Any links mate? I can't seem to see what I need! But that would be great if I can change to the screw on type!!! All I would need then is a better quality longer screw on hose. Cheers mate

 

[Stephenmoore30]

Thanks for that! However I must have come across wrong to what my problem is or what's happening! The hose is made onto my lance and it has a push on connection which pushes into the actual washer like a quick release kinda system and this is we're the hose is blowing off at the washer.
I'm just hoping its not a new washer to fix this as its a fairly new machine ...

Cheers Steve

 

[Stephenmoore30]

Tried wd-40 on it mate. No joy. I will see if it screws out that would be handy! Thanks for all the help will try a stick a pic up too if it helps any

Steve

 

[Stephenmoore30]

Where are you based pal?? I know I have a spare gun, hose and push in lance in my shed doing nothing

Edit: just looked and it's a screw thread hose, sorry

I'm in Northern Ireland mate!!! But big thanks for the offer. I'm going to try and screw out the push on connection in Ian's advise and if that works I will have threads... Steve

 

[Stephenmoore30]

Pic of connection on the actual washer were the hose blows of. Think the little spring just gives when you turn on the water. Should this screw out fairly easy, just I don't want to put alot if pressure on it and break even more! Cheers

Steve

 

[Stephenmoore30]

Thanks mate... Cheers And sorry to put you to the hassle of all that!

Steve