Detailing World Forum banner

Labocosmetica Primus

768 views 8 replies 4 participants last post by  Shiny_N!  
#1 ·
I’ve tried using Primus several times at the recommended dilution ratio in a foam lance,but when i rinse it my car is still covered in traffic film.I know they recommend spraying the lower parts with a primus mix in a spray bottle then applying the snow foam but to me I shouldn’t have to do that.

Anyone got any recommendations to just use it as normal snow foam on its own?
 
#2 ·
What Dilution ratio are you using ? Depending on severity of the dirt - dilutiuons need to be adjusted , it sounds in your case that trigger / pump spray may be a better option for you to help soften, remove in prewash format
 
#4 ·
For the cleaning of rims and tyres dilution 1:3 to 1:10; for the cleaning of the lower sides of the
vehicle, rails and bumpers or to remove gnats dilution 1:20; for the cleaning of very dirty vehicles
dilution 1:50 dispensing the product from the bottom upwards; for washing of medium-dirty vehicles
dilution 1:80, dispensing the product from the bottom upwards; for frequent washing dilution 1:100.
DISPENSING WITH THE FOAM GUN SYSTEM: in this case, it is advisable to respect the
normal dilutions, obtaining the output delivery as those recommended with the spray dispenser
described above. The final dilution varies according to the high-pressure water cleaner used.
We generally recommend diluting PRÌMUS 1:5 for winter dirt, 1:10 for summer dirt and for
weekly washing. After application wait a few minutes and rinse with high pressure.
 
  • Helpful
Reactions: Shakmeister5000
#5 ·